Submersible pump for mining is a submersible pump type, vertical installed, submerged in deep well fully. Submersible pump for mining could be powered by solar panels with putting inverter or diesel engine generator if there is no electricity in the area.
Submersible pump for mining models:
cast iron/SS304/SS316/SS316L/duplex stainless steel/SS904L...Customized is available.
| Model | Power | Flow rate | Head meters |
| QJ type | kw | hp | m3/h | m |
| 200QJ20-135/10 | 15 | 20 | 20 | 135 |
| 200QJ20-175/13 | 18.5 | 25 | 20 | 175 |
| 200QJ20-202/15 | 22 | 30 | 20 | 202 |
| 200QJ20-283/21 | 30 | 40 | 20 | 283 |
| 200QJ20-338/25 | 37 | 50 | 20 | 338 |
| 200QJ25-182/13 | 22 | 30 | 25 | 182 |
| 200QJ25-294/21 | 37 | 50 | 25 | 294 |
| 200QJ32-104/8 | 18.5 | 25 | 32 | 104 |
| 200QJ32-144/9 | 22 | 30 | 32 | 144 |
| 200QJ32-195/15 | 30 | 40 | 32 | 195 |
| 200QJ32-234/18 | 37 | 50 | 32 | 234 |
| 200QJ40-117/9 | 22 | 30 | 40 | 117 |
| 200QJ40-208/16 | 37 | 50 | 40 | 208 |
| 200QJ50-78/6 | 18.5 | 25 | 50 | 78 |
| 200QJ50-91/7 | 22 | 30 | 50 | 91 |
| 200QJ63-112/8 | 30 | 40 | 63 | 112 |
| 200QJ80-44/4 | 15 | 20 | 80 | 44 |
| 200QJ80-88/8 | 30 | 40 | 80 | 88 |
| 200QJ100-75/5 | 37 | 50 | 100 | 75 |
| 250QJ50-80/4 | 18.5 | 25 | 50 | 80 |
| 250QJ50-340/17 | 75 | 100 | 50 | 340 |
| 250QJ63-60/3 | 18.5 | 25 | 63 | 60 |
| 250QJ63-100/5 | 30 | 40 | 63 | 100 |
| 250QJ63-260/13 | 75 | 100 | 63 | 260 |
| 250QJ100-72/4 | 30 | 40 | 100 | 72 |
| 250QJ125-128/8 | 75 | 100 | 125 | 128 |
| 250QJ160-105/7 | 75 | 100 | 160 | 105 |
| 300QJ200-20/1 | 18.5 | 25 | 200 | 20 |
| 300QJ240-22/1 | 22 | 30 | 240 | 22 |
| 300QJ300-20/1 | 25 | 35 | 300 | 20 |
| 300QJ300-40/2 | 55 | 75 | 300 | 40 |
| 300QJ300-60/3 | 75 | 100 | 300 | 60 |
| 300QJ300-80/4 | 110 | 150 | 300 | 80 |
| 300QJ300-100/5 | 140 | 190 | 300 | 100 |
| 300QJ300-120/6 | 160 | 220 | 300 | 120 |
| 300QJ300-140/7 | 185 | 250 | 300 | 140 |
| 300QJ300-160/8 | 220 | 300 | 300 | 160 |
| 350QJ320-40/2 | 63 | 85 | 320 | 40 |
| 350QJ320-90/3 | 140 | 190 | 320 | 90 |
| 350QJ320-120/4 | 185 | 250 | 320 | 120 |
| 400QJ400-50/1 | 90 | 120 | 400 | 50 |
| 450QJ500-80/2 | 185 | 250 | 500 | 80 |
| 450QJ800-16/1 | 75 | 100 | 800 | 16 |
| 450QJ1000-16/1 | 90 | 120 | 1000 | 16 |
| 500QJ640-56/2 | 185 | 250 | 640 | 56 |
| 550QJ1200-18/1 | 110 | 150 | 1200 | 18 |
| 600QJ800-50/2 | 220 | 300 | 800 | 50 |
| 600QJ800-75/3 | 300 | 400 | 800 | 75 |
| 600QJ1000-20/1 | 110 | 150 | 1000 | 20 |
| 600QJ1000-40/2 | 220 | 300 | 1000 | 40 |
| 600QJ1000-60/3 | 300 | 400 | 1000 | 60 |
Submersible pump for mining with motor sleeve to accelerating motor cooling, cleaning drainage Bottom suction submersible pump, accelerating motor cooling, cleaning drainage.
Filter screen at the bottom of the casing to prevent solid particles from entering the pump body, protecting the pump.
Some notes for submersible pump for mining:
1. Checking the power cable, no broken
2. Turning the impeller by wrench, confirm it can be turned smoothly
3. Checking the drain hole at the bottom of the water pump. If it is loose, tighten it
4. Fulling the motor will clean drinking water
5. Tighten the screws of the water injection hole and exhaust hole on the upper part of the motor
6. After installing the pump into the well, observe the flow rate and current. If the current is common and the flow is small, it may be reversed. Adjust the steering. If the current is still high and the flow is small, there may be water leakage from the pipeline connection. Check the pipeline.
A video showing about SLAPK:
Product Tags:
|
|
Submersible Water Pump for Mining Images
|
